Technical Specifications; Instructions For Use - Flex ADM 30 Instrucciones De Funcionamiento Originales

429.279_ADM30.book Seite 13 Freitag, 4. März 2016 8:03 08
7 Base of device (reference level
8 USB charge socket
9 USB charge cable
10 USB charger

Technical specifications

–
Laser distance-measuring device ADM 30
Visible laser diode
Laser class
Measurement range *
Precision *
Smallest display size
Individual measurements (number) ≤ 6000
Automatic switch-off
– Laser beam
– Measuring instrument
Temperature range
– for operation
– for storage
Lithium polymer battery
Weight
* The measurement range may be less under unfavourable conditions
(bright sunlight, reflective surfaces). It is recommended to use a laser
target plate (optional).
)
–
Input voltage
Output voltage

Instructions for use

– Do not point the laser beam at people or
635 nm
animals.
2
– Do not stare into the laser beam.
0.2-30 m
– Do not place any optical instruments in the
± 3 mm
path of the beam.
This measuring instrument generates laser
1 mm
radiation which may cause blindness.
– Do not use the measuring instrument in damp,
20 s
dusty or sandy environments. Device
180 s
components may be damaged.
– If the device is brought from a very cold to a
0 °C ... 40 °C
warmer environment or vice versa, you should
–20 °C ... 60 °C
allow the device to acclimatise before using it.
500mAh/3,7V
76 g
USB charger
100–240V~
5V
WARNING!
CAUTION!
FLEX ADM30
/ 1A
13