en
Switching
the appliance on
Press the On/Off button 1/8.
Warning signal is emitted. When
the alarm button 2/1 is pressed,
the warning signal stops.
The alarm button 2/1 remains lit until
the set temperature has been reached.
The factory has recommended
the following temperatures:
Refrigerator compartment: +4 °C
■
Freezer compartment: –18 °C
■
Operating tips
When the appliance has been
■
switched on, it may take several hours
until the set temperatures have been
reached.
The fully automatic No Frost system
■
ensures that the freezer compartment
remains free of ice. Defrosting is no
longer required.
The sides of the housing are
■
sometimes heated slightly. This
prevents condensation in the area of
the door seal.
If the freezer compartment door
■
cannot be immediately re-opened after
it has been closed, wait until the
resulting low pressure has equalised.
30
Setting
the temperature
Fig. 2
Refrigerator compartment
The temperature can be set from +2 °C
to +8 °C.
Keep pressing temperature selection
button 6 until the required refrigerator
compartment temperature is set. The
value last selected is stored.
The set temperature is indicated on
display 7.
We recommend a factory setting
of +4 °C in the refrigerator compartment.
Perishable food should not be stored
above +4 °C.
Freezer compartment
The temperature can be set from -16 °C
to -24 °C.
Keep pressing temperature selection
buttons 3 until the required freezer
compartment temperature is set.
The value last selected is stored.
The set temperature
is indicated on display 4.
We recommend a factory setting of
-18 °C in the freezer compartment.