Selecting The Spectrum Analyzer; Labelling A Motion Display - Sony CDX-CA750X Manual De Instrucciones

Selecting the spectrum
analyzer
The sound signal level is displayed on a spectrum
analyzer. You can select a display for ten patterns
(A-1 to A-5 or B-1 to B-5), or the automatic
display mode where all the patterns appear.
1
Press (SOURCE) to select a source
(radio, CD, or MD).
2
Press (MENU).
3
Press either side of (DISC/PRESET)
repeatedly until "SA" appears.
4
Press either side of (SEEK) repeatedly
to select the desired setting.
5
Press (ENTER).

Labelling a Motion Display

You can label a Motion Display with up to 64
characters to appear when the unit is turned off.
Labels will scroll in the display in the M.Dspl 1
mode (the display remains lit even when the
power is off).
1
Press (OFF).
CD/MD playback or radio reception stops
(the key illumination and display remain on).
2
Press (MENU), then press either side
of (DISC/PRESET) repeatedly until
"Name Input" appears.
3
Press (ENTER).
28
4
Enter the characters.
1 Press (DISPLAY/PTY) to select the
character type.
A a 0 A
t t t
2 Press the (+)*
1
(DISC/PRESET) repeatedly to select
the desired character.
A B C
t t t ...
2
t ... t ! t " t
*1 For reverse order, press the (–) side of
(DISC/PRESET).
*2 (blank space)
3 Press the (+) side of (SEEK) after
locating the desired character.
If you press the (–) side of (SEEK), you
can move back to the left.
4 Repeat steps 1 to 3 to enter the
entire sentence.
5
Press (ENTER).
Tips
• Simply overwrite or enter "
sentence.
• To erase all sentences, press (ENTER) for
2 seconds after step 3.
side of
x y z 0 1
t t t t
A
# ... t 2 t
*
" to correct or erase a