Remote Control Installation - Yealink UVC40 Guia De Inicio Rapido

E
N
Remote Control and Cable Ties Installation
G
L

Remote Control Installation

I
S
H
Hardware Interface Instructions
1 Reset: reset the UVC40 to factory defaults.
2 DC48V: connect to the power adapter.
Video Out: connect to a PC as video output.
3
4 Microphone: connect to the microphone (for exmaple, VCM34).
5 USB: /
Line In: connect a 3.5mm audio connector to use the UVC40 as an audio output device.
6
Security slot: connect a universal security cable to the UVC40 so that you can
7
lock the UVC40 down.
8
Pairing key: press the pairing key to pair the CPW90 wireless microphone.
Cable Ties Installation
1 2 3 4 5 6 7
4
8