Busch+Müller IQ-XSH Instrucciones De Uso página 8

4. Legal Regulations
Before riding your bicycle on public roads, you must learn about and observe all applicable national,
state and local laws and regulations. These may be found in the Highway Code, or other sources
depending on your country of residence.
Never cover or conceal bicycle lights. Always make sure the bicycle lights are correctly adjusted.
In Germany, the prescribed mounting height ranges between 400 und 1,200 mm. In other countries, the
respective applicable regulations must be observed accordingly. You will find more details in the relevant
regulations of your country, e.g. in the Road Traffic Licensing Regulations, or the Instruction Manual
of your bicycle or e-bike. If necessary, contact a local bicycle specialist retailer. Make sure your lights
are positioned and adjusted in accordance with all legal regulations and to ensure they do not blind
oncoming traffic.
5. Package contents
High beam headlight with connector cable| high beam button with cable | handlebar bracket | mounting
screws | mounting tools | front reflector (not for IQ-XL)
6. Assembly
General notes:
Ensure that the headlight and cabling – especially the cable leading from the handlebar switch to the
14
headlight – are securely fixated on the e-bike, so as not to impede or jeopardize riding. If, for
example, a cable or headlight is caught in the spokes there is a risk of injury and death.
6.1. Headlight assembly
Safely affix the headlight on the bike's fork head using the enclosed Busch + Müller Bracket
in a way to ensure that it does not move all by itself and cannot change its position on the bike.
For headlamps with a separate reflector (IQ-XSH and IQ-XM) please ensure to align the reflector
vertically to the riding surface.
2
In order to avoid falls, accidents and serious injuries, use only pre-installed
WARNING
mounting bracket or other appropriate Busch + Müller bicycle light mounting brackets. Installing a
bicycle light on a bicycle using brackets which are not suitable or are positioned inappropriately,
can lead to the light becoming loose, slipping and getting caught in the spokes of the wheels.
Never install brackets on the fork legs or struts!
WARNING
No mounting underneath the handlebar: If the headlight is suspended underneath the
handlebar, the light field is reversed and oncoming traffic blinded which is a violation of
traffic regulations. Neither do we assume any liability for possible splash water damage.
WARNING Never install a bracket on conical fork legs or strut substructure!
Tighten all screws so that the bicycle light cannot move. This is especially important when riding
on uneven surfaces. The light has a sufficiently tight seat when it is difficult to adjust its position.
1
15