Inserting The Batteries; Default Setting - Speedlink XANTHOS Manual De Uso

Use of the remote control
fig. 4

Inserting the batteries

1. Remove the cover of the battery compartment.
2. Insert 2 batteries as indicated by the markings inside the battery
compartment.
3. Replace the cover of the battery compartment
Notes about batteries:
Keep batteries out of reach of children.
Do not mix old and new batteries, or batteries of different types. Follow
manufacturer's instructions on battery use.
Remove old, weak or worn-out batteries promptly.
Always recycle or dispose of used batteries in accordance with local
regulations.

Default setting

To return to the default settings, switch the system off and remove the
power cable from the power outlet. Switch the system on again after
around 10 seconds.
Wall mounting the satellites
To enjoy full surround sound, you have the choice of mounting the sa-
tellites on the wall. The necessary screws, etc. are included with the
product.
Fig. 3 shows how to fix the brackets to the satellites.
Technical data
Model no.:
Output (RMS) overall:
Subwoofer:
1. Power: puts the system in standby
mode
2. Mute: mutes the volume.
3. Volume (+/-): for increasing/reducing
the volume
4. Subwoofer (+/-): for increasing/
reducing the bass level
5. Centre (+/-): for increasing/reducing
the volume of the centre speaker
6. Surround (+/-): for increasing/
reducing the volume of the rear
speakers.
SL-8275
90 W
50 W
14
D
GB
F
E
I