Care And Maintenance; Troubleshooting - Task Force SGY-GUN3 Manual De Instrucciones

CARE AND MAINTENANCE

Use a wet towel to clean the grease gun body. Clean it regularly.

TROUBLESHOOTING

Problem
Gun will not
dispense grease.
WARRANTY
One year limited warranty:
The manufacturer warrants this product against defects in materials and workmanship for
one year from date of purchase. If within this period a product is found to be defective in
material or workmanship, the product must be returned with a copy of the bill of sale as proof
of purchase to the place of purchase. The manufacturer will, at its option, repair, replace or
refund the purchase price to the consumer. This warranty does not cover the product becoming
defective due to misuse, accidental damage, improper handling and/or installation and specifically
excludes liability for direct, incidental or consequential damages. As some states do not allow
exclusions or limitations on how long an implied warranty lasts, the above exclusion and limitation
may not apply to you. This warranty gives you specific rights and you may also have other rights
which vary from state to state.
Possible Cause
1. Grease cartridge or barrel
barrel is empty.
2. Air is trapped in the head.
Corrective Action
1. Replace the grease cartridge or refill
the barrel.
2. Connect the rod to the rubber plunger
assembly #1.
Slightly loosen the head from the barrel.
Push the rod handle to expel the trapped
air, re-tighten the head. (Or if your gun
has an air relief valve, press it while
pushing the rod handle) #2.
Disconnect the rod from the rubber
plunger assembly #3.
4
Printed in China