General Functions; Setting The Clock; Setting The Alarm - Bigben Interactive Rubik's RR80 Manual De Instrucciones

General Functions

1. FM radio using the Digital Tuning System (DTS)
2. LCD display with blue backlight and dimmer control
3. 12/24-hour clock display
4. Alarm can be set to radio or beeping sound
5. Beeping sounds can be set to ascend (increase in volume from quiet to loud)
6. 20 preset radio stations
7. Automatic/manual search up/down
8. SCAN (automatic memory store) function

1. Setting the clock

• In standby mode, press hold Clock Set [4]. The display will flash and show 0:00.
• Set the time by pressing [10] to set the hour and [11] to set the minute.
• Press Clock Set [4] again to confirm the time.
Setting the clock format
• After the time setting is confirmed, it will switch to clock format.
• Press [10/11] for 12H (12-hour format) or 24H (24-hour format).
• 12/24H will flash. Now you can adjust the time format:
• The clock format will be set and be automatically confirmed if the user does not press any buttons
for 5 seconds.
2. Dimmer control (display digit light)
• Press DIM [8] to control the brightness of digits on the display.
• There are 3 levels: Bright, dim light and dark.
High level (bright)
Mid. level (dim light)
Low level (dark)

3. Setting the alarm

• In standby mode, press Alarm set [5] for 3 seconds, then press [10] to select "Alarm 1". The icon will
flash and the main digit will show 0:00.
• Press [10] again to set the alarm hour.
• Press [11] to set the alarm minute.
• Press Alarm set [5] again to confirm the alarm time. "Alarm 1" keeps flashing.
• Press [10/11] to switch between the
• Press Alarm set [5] to confirm the alarm output of Alarm 1.
• There is dual alarm. The icon will automatically switch to Alarm 2.
• Repeat all the steps above and select the same alarm output as Alarm 1.
• Press [5] again to confirm the settings for Alarm 2.
Turning off the alarm
Press [2] Alarm off. The Alarm will resume the function at the same time the next day.
radio and bell (beeping sound) alarm output.
- EN 3 -