Cooper Lighting Solutions Fail Safe ADC140736 Instrucciones De Instalación

697916 ADC140736
Installation Instructions – WSFA Wall Mount Bracket
Instructions d'installation - Support WSFA pour montage mural
Instrucciones de instalación del soporte de montaje de pared WSFA
IMPORTANT: Read carefully before installing fixture.
Retain for future reference.
APPLICATION: The Wall Mount Bracket is for use when a
horizontal (radial) adjustment of a surface or wall mount
floodlight is required.
The WSFA is designed for use with Cooper Lighting
Solutions FSF slipfitter adapter and will accept the
following Cooper Lighting Solutions yoke (trunnion)
mount floodlight luminaires:
FFL Series
●
N Note: All statements, technical information and
recommendations contained herein are based on
information and tests we believe to be reliable.
The accuracy or completeness thereof are not
guaranteed. In accordance with "Terms and
Conditions of Sale" , and since conditions of use are
outside our control, the purchaser should determine
the suitability of the product for his intended use
and assumes all risk and liability whatsoever in
connection therewith.
INSTALLATION
1. Determine the mounting location of the bracket using
the bolt hole pattern (Figure 1.).
2. Mount the bracket (with elbow pointing up) using
four (4) 1/2" bolts or lag screws (not provided) or by
welding in position.
3. Proceed to the instructions provided with the FSF
slipfitter adapter and the floodlight luminaire to
complete the installation (mounting and wiring).
Final Horizontal (Radial) Adjustment
1. Loosen the four (4) slipfitter base bolts.
2. Rotate the floodlight housing to the desired position.
3. Tighten the slipfitter base bolts to 19 Ft - lbs to lock in
position.
WARNING
TN avNid oht risk Nf firt, txplNsiNn Nr tltcoric
shNck, ohis prNduco shNuld bt insoalltd, insptcotd,
and mainoaintd by a qualifitd tltcorician Nnly, in
accNrdanct wioh all applicablt tltcorical cNdts.
WARNING
TN avNid tltcorical shNcke:
Tht flNNdligho luminairt ustd wioh ohis brackto muso
bt supplitd by a wiring sysotm wioh an tquipmtno
grNunding cNnducoNr.
DO NOT ust oht wall mNuno brackto as grNund.
4 MGT. Holes
.563 Dia.
2.81
5.62
7 .00
Figurt 1.
Brand Logo
reversed out of
black
INS # INS # INS #
2.81
5.62
7 .00