Technical Information; Warranty Information - Bayside LAGOON Manual De Instrucciones

Lagoon Fan Installation Instructions
When it is quiet (especially at night) you may hear occasional small noises. Slight power fluctuations and frequency
signals superimposed in the electricity for off-peak hot water control, may cause a change in fan motor noise. This
is normal. Please allow a 24-hour "settling-in" period, most noises associated with a new fan disappear during this
time.
The manufacturer's warranty covers actual faults that may develop and NOT minor complaints such as hearing the
motor run – All electric motors are audible to some extent.
CARE AND CLEANING:

Periodic cleaning of your ceiling fan is the only maintenance required. Use a soft brush or lint free cloth to avoid
scratching the paint finish. Please turn off electricity power when you do so.

Do not immerse your ceiling fan in the water. It could damage the motor or the blades and create the possibility
of an electrical shock.

Ensure that the fitting does not come in contact with any organic solvents or cleaners.

To clean the fan blade, wipe with only a damp clean cloth with NO organic solvents or cleaners.

The motor has a permanently lubricated ball bearing so there is no need to oil.
NOTE: Always turn OFF the power at the mains switch before attempting to clean your fan.
Fan models
52" blade fan only
52" blade fan with light
IN AUSTRALIA / NEW ZEALAND – Please refer to the separated WARRANTY STATEMENT.
IN EUROPE – If you are a European customer please contact the retail outlet where the fan was
purchased for warranty service.
10 | P a g e

TECHNICAL INFORMATION

Rated Voltage Rated power (motor)
220-240 VAC
220-240 VAC

WARRANTY INFORMATION

Rated power lamp
55 W N/A
55 W Max. 23 W, GX53