UPRtek MK30S PREMIUM Manual Del Usuario página 6

2.1 Preparing Before Use
Install SD card
You may save measurement data in file of Excel (xls) format and image data (spectrum and
chromaticity coordinates diagram) in format of (JPG) in SD card with capacity at 1GB or
more.
※ Insert SD card in direction as indicated
Strap installation
Step1. Unscrew the strap.
Step2. Tie the strap to the strap hole of MK350S Premium.
Step3. Tie the strap to the sensor cover.
Step4. Screw the strap.
2
1. The SD card features a card latch design to prevent it from loosening You may feel that the SD
card is stuck when it is inserted in or removed. In case it is like this, pull or push it a little harder
to get it in place or removed. To remove SD card: Press it as shown in step ①, pull it out after
it ejecting a little as shown in step ②.
English
※ Press to remove SD card
1
3
1
4
- 7 -
2.1 Preparing Before Use
Power on
Press the Power button for 1 second and then release it.
When the power is on, the Power On LED will light the green indicator.
When the power is off, the green indicator will be off.
Dark calibration
MK350S Premium will display splash screen and then the screen prompts with message for
dark calibration.
2
1. Press and hold power key for 1 second to power on this product.
2. Press and hold power key for 3 seconds to power it off.
Please run dark calibration after each power on of this product.
3.
1
"Do you want to do dark calibration?" Please select "Yes" .
2
After the sensor cover is put on, please select "OK".
3
When the screen shows "Dark calibration finish.", please press "OK" to
enter the main page.
- 8 -