Step 5: Installing Software Drivers
Drivers for Windows 2000, XP, Server 2003, and Vista; and Linux are included on
the CD that came with your FastTrak card. Please download the latest drivers
from the Promise website at http://www.promise.com/support.
Windows systems usually recognize the FastTrak card, prompt you for the driver,
and perform the driver installation automatically.
If you are installing the FastTrak card at the same time as your operating system
or you prefer to read step-by-step directions, see Chapter 3 of the FastTrak
TX4650, TX2650 User Manual on the software CD.
Step 6: Installing WebPAM
The following instructions are adequate for most users. For complete installation
instructions, see Chapter 2 of the FastTrak TX4650, TX2650 User Manual on
the CD.
Operating System Support
On the Host PC where you install the FastTrak controller and WebPAM, Promise
Technology recommends:
•
Windows Vista Business,
Enterprise, or Ultimate
•
Windows Server 2003
•
Windows XP Professional
WebPAM supports these operating systems. Choose one of them to take full
advantage of all the features of WebPAM.
Browser Support
On the Host PC where you install the FastTrak card and WebPAM, you must
have one of the following browsers:
•
Internet Explorer
•
Mozilla
•
Firefox
•
Netscape Navigator
If you do not have one of the above browsers, install the browser first and make it
the default browser. Then install WebPAM.
Step 5: Installing Software Drivers
•
Windows 2000
•
Red Hat Enterprise 5
•
SuSE Linux Enterprise Server 10
11