Kenwood JKP250 Instrucciones página 3

This appliance conforms to EC
G
directive 2004/108/EC on
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended for
contact with food.
before using for the first time
Remove the cups and spoons from
G
the kettle.
Fill to 'MAX', boil, then pour the
G
water away. Repeat 2 to 3 times.
Wash the cups and spoons and then
G
dry.
key
hinged lid
lid release catch
on/off switch
indicator light
water level windows
cord clip
filter
2 cups
2 spoons
dual voltage selector
to use your travel jug
kettle
1 Remove the cups and spoons from
the kettle.
2 Select the required voltage by turning
the selector control
check that you have selected
the correct voltage before
using the kettle.
. Always
3
3 Fill the kettle through either the spout
or lid. To open the lid, pull back the
lid release catch
must be between 'MAX' and 1 cup
(200mls).
Be economical: do not boil more
G
water than you need.
To improve the quality of your drinks
G
always use fresh water.
Empty the kettle after each use.
G
4 Check the lid is closed.
5 Plug in and switch on. The indicator
light will come on.
6 Your kettle will boil and switch off
automatically. To re-boil, wait a few
seconds - the on/off switch needs
time to reset.
If you experience problems
G
with your kettle switching on
and off during use or
switching off before boiling,
check that the flat element is
free from scale - see
"descaling".
Take care when using the cups and
G
do not overfill above the inner rim
(approx. 200mls).
Your kettle is fitted with a filter to hold
G
back limescale particles.
If you find drops of water under your
G
kettle, don't worry - it is just
condensation.
boil-dry protection
If you switch on with too little water,
G
your kettle will cut out automatically.
Switch off, unplug and let it cool
down before re-filling. When it has
cooled down, the switch will reset
itself.
. The water level