Fresh Breeze CF10731 Manual De Instrucciones

CF10731
Installation Bulletin:
Bulletin d'installation :
Boletín de Instalación:
Estimated time of installation:
Temps estimé pour l'installation :
Tiempo estimado de instalación:
Application: Suzuki Grand Vitara
Application:
Aplicación:
For more application specifics,
please refer to our catalog.
Pour obtenir plus d'information
sur les applications, veuillez
consulter notre catalogue.
Para obtener información
específica sobre la aplicación,
consulte nuestro catálogo.
FRAM Group Operations LLC
Danbury, CT 06810-5109 U.S.A.
©2012 FRAM Group IP LLC
FRAM Group (Canada) Inc.
2430 Meadowpine Blvd.
Unit 105 & 107
Mississauga, ON
L5N 6S2 Canada
SOME VEHICLES MAY DIFFER SLIGHTLY. IF YOU HAVE QUESTIONS
REGARDING THIS FILTER, ITS INSTALLATION OR MORE DETAILS
SPECIFIC TO YOUR VEHICLE, PLEASE VISIT
www.framfreshbreeze.com
FOR HOW-TO VIDEOS AND ADDITIONAL INFORMATION.
CERTAINS VÉHICULES PEUVENT PRÉSENTER DES DIFFÉRENCES. SI VOUS
AVEZ DES QUESTIONS CONCERNANT CE FILTRE, SON INSTALLATION OU
DÉSIREZ OBTENIR PLUS DE DÉTAILS CONCERNANT VOTRE VÉHICULE,
VEUILLEZ VISITER LE www.framfreshbreeze.com POUR OBTENIR
DES DÉMONSTRATIONS VIDÉOS ET PLUS D'INFORMATION.
PUEDE VARIAR UN POCO EN ALGUNOS VEHÍCULOS SI TIENE PREGUNTAS
SOBRE EL FILTRO Y LA INSTALACIÓN O DESEA INFORMACIÓN EN DETALLE
PARA SU VEHÍCULO, VISITE www.framfreshbreeze.com, DONDE
ENCONTRARÁ VIDEOS INSTRUCTIVOS E INFORMACIÓN ADICIONAL.
Importado por:
FRAM Group Operations Mexico City S.A. de C.V.
Carretera México-Cuautitlán km 31.5 S/N
Nave 5, Conjunto Industrial Cuautitlán.
Col. Loma Bonita
Cuautitlán, Edo. de México
MEX, C.P. 54800
Tel. 01 800 7154 135
Hecho en China
TOOLS: None required.
LOCATION OF CABIN FILTER: Under the dash on the passenger side of the vehicle behind the glove box.
07-10
REMOVE ALL DEBRIS IN AND AROUND FILTER LOCATION.
10 minutes or less
1. Unlatch and open hood. Disconnect the negative (-) cable at the battery.
10 minutes ou moins
10 minutos máx.
2. While sitting in the passenger seat, open the glove box.
3. To lower the glove box, push in on both side panels to clear the glove box stops.
4. Let the glove box swing all the way downward.
5. Now with the filter housing access door exposed, unfasten the locking clasp which is securing the filter housing access door.
6. Remove the door.
7. Remove the old cabin filter by pulling straight out.
8. Install new cabin filter.
9. Set the filter housing access door back into its original position and lock clasp.
10. Bring the glove box back into position by pressing in on both sides until the glove box stops re-engage.
11. Close glove box.
12. Re-connect negative (-) cable at the battery.
13. Close hood.
Note: For some models you may have to enable the air bag system after installing your new cabin filter.
Refer to: Enabling Air Bag System: Advanced Air Bag in your owner's manual.