Tool-Specific Safety Warnings - Ingco RS4508 Manual De Instrucciones

situation.
Service
I) Have your power tool serviced by a qualified repair person using only.
Identical replacement parts.
Have your power tool serviced by a qualified repair person using only identically
replacement parts. This will ensure that the safety of the power tool is maintained.

Tool-specific Safety Warnings

--Use the machine only for dry sanding. Never use this sander for wet sanding or
liquid polishing. Failure to follow this rule may result in risk of electrical shock.
Penetration of water into the machine increases the risk of an electric shock.
--Apply the machine to the workpiece only when switched on and switch the
machine off only after it has been lifted away from the workpiece. The power tool
can move suddenly.
--Never touch the sanding paper in use. Danger of injury.
--Ensure the workpiece is firmly clamped to prevent movement.
--Your sander is a hand held tool, do not clamp your finishing sander.
--Never stop the sander by applying a force to the base plate.
--Only use sanding paper in good condition. Do not use torn or worn sanding paper.
Never use the machine with a damaged.cable. Do not touch the damaged cable
and pull the mains plug when the cable is damaged. while working. Damaged
cables increase the risk of an electric shock.
--Do not sand magnesium material due to the risk of fire.
--Do not sand material including asbestos due to a health rise.
--Do not sand lead based paint due to the rise of lead poisoning.
--Do not eat or drink in the working area of the sander.
--Do not allow people to enter the working area without wearing a dust mask.
Where possible, seal off the working area to contain the dust for later removal.
Wear hearing protection!
Always wear eye protectors when using this sander.
Wear breathing protection!
when using this sander.
9|English
Always wear a dust mask