Site Preparation - Style selections DBTA608-92 Manual De Instrucciones

INITIAL INSTALLATION INSTRUCTIONS
NOTE: This package contains a shower back wall that requires two side walls to complete the
entire unit. Installation begins with the back wall and proceeds to the side walls (using separate
detailed instructions).

1. SITE PREPARATION

Shower wall assembly requires a square stud pocket
constructed to the dimensions shown. Exact stud
placement within the boundaries of these dimensions
is not critical using the adhesive method of installation.
When using hanging rail method, any deviation from
this layout will result in the inability to use this system
without adjustments being made to the existing stud
pocket. See Modification to Stud Layout in HANGING
METHOD INSTALLATION INSTRUCTIONS on page 6.
NOTE: If adhesive method is being used, the hanging
rails applied to the shower panels will not interfere with
this method. Therefore, no alterations to the panels are
required.
1
6 in.
32 in.
4
16 in. 16 in. 16 in.
10 in. 10 in.
12 in. 12 in.
10 in. 10 in.
60 in.
Lowes.com
6 in.