Graco Smart Seat Guia página 2

11
Remove and discard
tongues.
14
Unsnap the headrest pad at
the harness slot location
17
Lay the seat so the back is facing up. Take the right side harness strap
and thread the right side corner of the harness strap under the roller
bar as shown.
18
Repeat for the left side harness strap by threading the left corner
under the roller bar, pushing until you can pull the strap around the bar.
12
With tongues attached, slide the NEW
buckle onto harness straps. Make
sure the red button is facing out and
the harness straps are not twisted.
15
Making sure the harness straps are
not twisted, thread the harness straps
into the red harness slots.
13
Re–attach chest clip
and slide the clip down
to the buckle. MAKE
sure not to twist straps.
16
With harness strap in
place, resnap the pad at
both harness slot
locations.
Push the harness strap under the bar until
you can pull the harness strap around the