Mark ST 170 Instrucciones Para La Instalación

ST 170
Instruction of
Wall fixed installation
1.Product Features
Product weight: 2.26kg; TV size support:32"-63";
Distance to the wall: 70mm; Maximum load:40kg; For VESA standard: 600x400mm
2.Hardware List
Important: We are not responsible for any personal injury or product damage
due to mishandling, incorrect mounting, incorrect assembly or incorrect use of
this product.
Note: The supplied wall mounting hardware is not for use on steel stud walls or
cold cinder black walls. If you are uncertain what material your wall is constructed
of or any question regarding the proper installation of this wall mount, contact a
qualified contractor.
Caution: This LCD/Plasma wall mount is intended for use with television that
does not exceed the maximum weight capacity designated. Using this mount with
products heavier than the maximum weight indicated may result in instability
causing possible injury.
Screw spare parts list
N o. D escr i pti on
1
2
A
B
C
D
E
F
S pecifications Model
Wall plate
Plasma arm
M6x50 Wallboard screw
Φ10 Plastic screw
M6x20mm Cross round screw
M8x16mm Cross round screw
Ф6plastic spacer
Ф6 washer
G
H
Instruction of installation operation
1
2
Q ty.
x1
x2
3
x4
x4
x4
x4
x4
x4
washer
M5x30mm Cross round screw
B
F
A
Using the bubble level to ensure
the wall plate is level, Pre-drill 6
holes with a 10mm bit to 50mm
deep.Insert wall anchors into
the holes,then using long bolts
to mount the wall to studs.
CD G
E
H
x4
x2
Using Long bolt(CorD),
washer(G) and Spacer
(E) to mount TV set to the
a luminum siding .