Página 1
Portable Evaporative Cooler CP35 CP65 Read And Save These Instructions Evaporative Cooling Evaporative cooling is an economical way to cool. Air is cooled while being drawn across wet evapora- tive media. The movement of this fresh cooled air over the skin is what makes it feel cool. It is important when using an evaporative cooler in an enclosed space to have adequate exhaust by opening windows, doors, etc.
Página 2
Cooler Installation Install Casters This unit comes equipped with 4 stem casters; 2 locking and 2 non-locking. Before operation turn the unit on its side and press the stem casters into the corner holes. Install the locking caster on one side of the unit and the non-locking casters on the opposite side.
Página 3
Maintenance WARNING: Before doing any maintenance be sure unit is unplugged. Drain Unit Note: To remove the media frame, first remove the screw located above the frame. To drain the unit, remove the media frame and remove the rubber drain stopper from the bottom of the unit by pulling it out of the drain hole.
• Check that unit is plugged into a 120V power receptacle. • Check the fuse or breaker. • If connected to a GFCI outlet, check if it is tripped. Replacement Parts Description CP35 CP65 Evaporative Media............110132-1 110132-2 Evaporative Media Frame Assembly......110870-1 110870-2 Set Of (4) Keepers ............110871...