Leviton LumaCAN PST24 Instrucciones De Instalación

WARNINGS AND CAUTIONS
• TO AVOID FIRE, SHOCK, OR DEATH: TURN OFF POWER at circuit breaker or fuse and test that power is off before wiring!
• To be installed and/or used in accordance with electrical codes and regulations.
DESCRIPTION
The PST24-R41 is a Power Supply capable of providing both high current Class 2 power and specific current limited power on RJ-45's for LumaCAN networks. This power supply is
used to provide power to Class 2 low voltage powered devices requiring +24VDC power. The maximum output of the Power Supply is 4.1A across all four ports. The terminals support
full power output and each of the (3) pairs of RJ-45's for LumaCAN are limited to 1.5A. Each pair of RJ-45's for LumaCAN has an input and an output connector where the data passes
between the two. Power is applied only to the output connector. The PST24-R41 is powered via a constant, hard wired 100-240VAC, 50/60Hz line voltage input. The unit is 1/2 U size and
comes with brackets to mount into a 19 in. rack. Two PST24-R41, or one PST24-R41 and one NPRPT-006 6-port LumaCAN repeater can be mounted side-by-side in a 19 in. rack taking
up a single 1 U space. The PST24-R41 can be used to provide additional power to LumaCAN network runs that require additional current due to run length or number of devices on the
run. It is also capable of providing power to other low voltage devices such as occupancy sensors, photocells, and low voltage switches, etc.
SPECIFICATIONS
• Input: 100-240VAC 50/60HZ, 1.9A Max
• Max Output: Regulated +24VDC, 4.1A, 100W
• Output: Over-Current or short-circuit, automatic recovery, voltage
reduction for over-current.
• (4) Output Ports, Max Output rating of 4.1A (100W) cannot be
exceeded. Max per port is 1.5A (36W). Calculate max as sum of
output on each port:
- Port T, +24V/Com Terminals: 100W, 4A
- Port A: LumaCAN, RJ-45, 1.5A
- Port B: LumaCAN, RJ-45, 1.5A
- Port C: LumaCAN, RJ-45, 1.5A
NOTE: RJ-45 are for LumaCAN only using Category 6 wiring.
Data passed through from IN to OUTPUT of each port. Power is
blocked on Input and added to Output connector.
COMPLIANCE
• CE (European EMC & Safety)
• FCC CFR 47, Class A (US EMC)
• ICES-003, 8/2012 (Canada EMC)
• ETL (US & Canada Safety)
ENVIRONMENTAL
• Ambient Operating Temperature Range: 32-104°F, 0-40°C
- Full 100W output guaranteed through entire operating temperature range.
• Storage Temperature: -13-185°F (-25-85°C)
• Operating Humidity: 0-90% non-condensing
• MTBF: >100,000 hours
INSTALLATION
1. Ensure all devices on LumaCAN networks are powered-off and disconnected.
2. Connect line voltage power to power input terminals.
3. Connect Input and Output LumaCAN runs for each of the output ports: T, A, B & C.
a) The run to which power should be added is connected to the output RJ-45.
b) The run which is data only is connected to the input RJ-45.
Use with 6-Port LumaCAN Repeater (NPRPT-6)
Unique but ideal application for the power supply is to use it in tandem with a
LumaCAN repeater.
• Creates multiple home runs, up to 1.5A on each run.
• Installed into a 19" EIA equipment rack (Leviton Cat No. EIA00-S01)
• The two devices can be screwed together using supplied screws with each unit.
To attach two devices:
- Remove covers
- Use supplied screws to internally connect to each other
- Reattach covers
- Short rack ear from each unit will get attached to side of each enclosure to
mount it to the rack.
FCC COMPLIANCE STATEMENT
The enclosed device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (i.) This
device may not cause harmful interference (ii.) This device must accept any interference received, including interference
that may cause undesired operation. Any changes or modifications not expressly approved by Leviton could void the user's
authority to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FOR CANADA ONLY
For warranty information and/or product returns, residents of Canada should contact Leviton in writing at Leviton Manufacturing of Canada Ltd to the attention of the Quality Assurance Department, 165 Hymus Blvd, Pointe-Claire (Quebec), Canada H9R 1E9 or by telephone at 1 800 405-5320.
Leviton warrants to the original consumer purchaser and not for the benefit of anyone else that this product at the time of its sale by Leviton is free of defects in materials and workmanship under normal and proper use for two years from the purchase date. Leviton's only obligation is to correct
such defects by repair or replacement, at its option. For details visit www.leviton.com or call 1-800-824-3005. This warranty excludes and there is disclaimed liability for labor for removal of this product or reinstallation. This warranty is void if this product is installed improperly or in an
improper environment, overloaded, misused, opened, abused, or altered in any manner, or is not used under normal operating conditions or not in accordance with any labels or instructions. There are no other or implied warranties of any kind, including merchantability and fitness for
a particular purpose, but if any implied warranty is required by the applicable jurisdiction, the duration of any such implied warranty, including merchantability and fitness for a particular purpose, is limited to two years. Leviton is not liable for incidental, indirect, special, or consequential
damages, including without limitation, damage to, or loss of use of, any equipment, lost sales or profits or delay or failure to perform this warranty obligation. The remedies provided herein are the exclusive remedies under this warranty, whether based on contract, tort or otherwise.
© 2016 Leviton Mfg. Co., Inc.
LumaCAN TM Power Supply
Cat. No. PST24
INSTALLATION INSTRUCTIONS
Output Fuse Type 5MA
4A, 125V
Fusible de type 5MA de
4 A, 125 V
Fusible de salida
Tipo 5MA
4A, 125 V
Port T Output - Output limited to
(4,1 A à 24 V c.c. max.)
Port d'entrée de ligne
Entrada de Línea LumaCan
LIMITED 2 YEAR WARRANTY AND EXCLUSIONS
For Technical Assistance Call: 1-800-824-3005 (U.S.A. Only) www.leviton.com
Output Power
T A B C
Port T Port A
In Out
Input Port A
Port d'entrée A
Puerto de entrada A
4.1A at 24VDC
Port de sortie T
Output Port A - Output
limited to 1.5A at 24VDC
Puerto T
Port de sortie A
Puerto de salida T
(1,5 A à 24 V c.c. max.)
Salida limitada a
Puerto de salida A
4.1A a 24VDC
Salida limitada a 1.5A
en 24VCD
6-Port LumaCAN Repeater (Cat. No. NPRPT-6)
Répéteur LumaCAN à six ports (NPRPT-6)
Repetidor 6-Entradas LumaCan (No. de Cat. NPRPT-6)
LumaCAN Line In
LumaCAN
LumaCAN Line A Output
Port de sortie de ligne LumaCAN A
Salida de línea A de LumaCan
LumaCAN Line B Output
Port de sortie de ligne LumaCAN B
Salida de línea B de LumaCan
INDUSTRY CANADA COMPLIANCE STATEMENT
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device. IMPORTANT! Any changes or modifications not expressly approved by
the party responsible for compliance could void the user's authority to operate this equipment. This Class B digital apparatus
complies with Canadian ICES-003.
NOTES:
• LED Indicators
Inactive indicates a fault such as a direct
short, overcurrent, or blown fuse.
• Output Fuse
Type 5MA - 4A, 125V
• Pollution Degree 2
Power Indicators (lit when active, unlit when inactive)
Témoins (allumés quand les ports sont actifs, éteints quand ils ne le sont pas)
Los Indicadores de Energía (iluminados cuando están activos, sin iluminar cuando
no están activos)
Port B Port C
In Out In Out
Input Port B Input Port C
Port d'entrée B Port d'entrée C
Puerto de entrada B Puerto de entrada C
Output Port B - Output Output Port C - Output
limited to 1.5A at 24VDC limited to 1.5A at 24VDC
Port de sortie B Port de sortie C
(1,5 A à 24 V c.c. max.) (1,5 A à 24 V c.c. max.)
Puerto de salida B Puerto de salida C
Salida limitada a 1.5A Salida limitada a 1.5A
en 24VCD en 24VCD
LumaCAN Power Supply (Cat. No. PST24)
Bloc d'alimentation LumaCAN (PST24)
Fuente de alimentación LumaCan (No. de Cat. PST24)
LumaCAN Line C Output
Port de sortie de ligne LumaCAN C
Salida de línea C de LumaCan
DI-000-PST24-20A
ENGLISH
H N G
Input Power - 100-240VAC,
50/60Hz
Alimentation d'entrée -
100/240 V c.a., 50/60 Hz
Entrada de energía
- 100-240VCA, 50/60Hz
DI-000-PST24-20A