PURE EuroCave Modo De Empleo página 16

4 - i
nstAlling youR Wine cABinet
15
Lock
14
14
As the door has turned 180 degrees, reposition your handle above
the lock (Full Glass and Black Piano doors only): Unscrew the three
screws placed on the side of the door, using the Allen wrench (2,5
mm), which you will find in the handle's box.
15
Remove the three caps.
10
GB
Côté face
Cadre de porte
avant
View from above
16
Seal
Door frame
Handle
Front
17
18
Lock
16
Position the handle on the specially designed groove on the door
frame. Insert the handle all the way into the groove using a forward
movement.
17
Screw the three screws back on. Take care not to catch the seal
when screwing.
18
Replace the three caps.
la rainure grâce à un
mouvement vers l'avant.
5 - l – s
Ayout toRAge
17 Revissez les trois vis.
Prenez garde à ne pas pincer
le joint au moment du vissage.
Your EuroCave cabinet was designed to be adaptable. Its storage equipment adapts to your requirements and can be added to over time.
Different types of storage 18 Replacez les trois
Standard storage equipment
bouchons.
Universal storage shelf
Ref.: AXUH
Capacity: 77 bottles
Max weight: 100 kg
Champagne sliding
shelf
Ref. : ACHH
Capacity: 10 bottles
Display shelf
Ref.: ACPH
Capacity: 22 bottles
Storage equipment available as an optional extra
Universal storage shelf 1
Ref.: AXUH2B 2
Ref.: AXUH2W
3
Capacity: 77 bottles
Max weight: 100 kg
The layout of your cabinet can be modified according to your requirements. Refer to pages 111-115 to see storage simulations.
1- A white marker pen is supplied in the accessories bag. It allows you to write on the shelf labels ("premium" equipment) in order to identify your bottles. 2- glossy black front 3- light
wood front
Layout advice
Your EuroCave wine cabinet has been designed to safely hold a maximum
number of bottles. We recommend that you observe the following advice
to optimize loading.
•
Distribute your bottles as uniformly as possible over the various cabinet
shelves, in order to spread the weight. Also ensure that none of the bottles
is touching the rear wall of the cabinet.
•
Spread the load over the entire cabinet rather than placing bottles all at
the top or all at the bottom.
•
Observe the loading instructions for the specific storage layout of your
cabinet and never stack bottles on a sliding shelf.
•
If you have sliding shelves, it is preferable to position them in the upper
section of your cabinet to facilitate daily access.
Note: adjusting an ACMS/ACHH/ACGMS sliding
shelf
When you purchase your cabinet, the sliding shelves are already adjusted
to ideally suit the internal dimensions of your appliance. If you purchase
a new sliding shelf, you may have to carry out this adjustment. To do so,
unscrew the screws 1 of the first right or left runner 2 (2 screws) then
position the runner at the desired width and tighten the screws. Repeat
this process for the second runner (if necessary).
Bordeaux Universal sliding shelf
storage shelf fitted with
Ref.: AXBH "Main du sommelier"
supports
Ref.: ACMS
Capacity: 78 bottles Capacity: 12 bottles
Max weight: 100 kg
Serrure
Magnum sliding shelf Serving sliding shelf
fitted with Ref.: ACVH
"Main du sommelier"
supports
Ref.: ACGMS
Capacity: 7 bottles Capacity: 20 bottles
Articulated
presentation kit for
ACMS shelves
Ref.: AOPRESAR
Capacity: 32 bottles
Universal sliding Articulated
shelf fitted with "new presentation kit for
generation Main du ACMS2 shelves
sommelier"supports 1 Ref.: AOPRESAR2
Ref.: ACMS2B 2
Ref.: ACMS2W
3
Capacity: 22 bottles Capacity: 32 bottles
•
In the same way, place one or two bottles of each of your
different wines on the sliding shelves and keep spare bottles on
the storage shelves. You then simply replace bottles when they
are consumed.
•
When using your wine cabinet, never pull out more than one
sliding shelf at a time.
NB: Never modify the position of the stiffener in your V-Pure-L
cabinet (see description page 6) without first consulting your
retailer and never handle this part when the cabinet is loaded.
2
1 2
11
GB