Ariston Thermo S/SGA X 50 Instrucciones Para El Uso Y La Manutención página 28

GB
FLUE GAS PROTECTOR CONNECTION
WARNING!
A blocked heater can be re-started following the instructions for normal startup, at
least 3÷5 minutes after the stop.
If the fault repeats, do not try to re-start again, but call in a qualifi ed technician to
remove the cause of the problem.
28
3
2
Install the fl ue gas hood (1) turning
•
it to the best position with refer-
ence to the sensor and the cable
exit from the water heater.
2
• Connect the cable terminals (2) to
the contacts of the fl ue gas protec-
tor (3).
• Proceed with normal water heater
start-up.
1