Electrical Wiring Connection - OYL MANUFACTURING COMPANY 05FW Manual Del Usuario

IMPORTANT : The figures shown in the table are for information purpose only. They should be checked and selected
to comply with the local/national codes of regulations. This is also subject to the type of installation and
conductors used.
Model
Voltage range
Power supply cable size
Number of wire
Interconnection cable size mm
Number of wire
Recommended fuse
Wire Clamp
Interconnection
Cable

ELECTRICAL WIRING CONNECTION

05 / 07 / 10 / 15 20 / 25
220V – 240V
!
1Ph / 50Hz +
2
mm 1.5 2.5
3 3
2 1.5 2.5
3 3
A 15 20
WM 05 FW ~ 25 FW
Chiller
Power Supply
Cable
• All wires must be firmly connected.
• All wires must not touch the water piping, or any
moving parts of the fan motor.
• The connecting wires between the indoor unit and the
outdoor unit must be clamped on the wire clamps
as shown in the figure.
• The power supply cord must be equivalent to H05RN-F
(245IEC57) which is the minimum requirement.
1-4