OPERATION
The appliance is intended only for domestic use, not
for professional use.
Feature
1 S.pout
2. Base station
3. Top lid
4. Lid release button
5. Handle
6. Temperate dial
7. On/off switch with pilot light
8. Power cord and plug
9. Water level
BEFORE USE FOR THE FIRST TIME
Before first use, remove possible manufacturing
process residues by boiling 3 full kettles of water.
Dispose this water.
Tip: You can use vinegar or special descaling agents
for the first time.
USE
1. Turn the jug so that the spout faces away from you.
2. Press the button to open the lid (4).
3. Fill the jug with the required quantity of water (at
least 0.7 litres, and a maximum of 1,8 litres). Never fill
the water boiler over the "max". Otherwise the hot
water can spatter out of the base.
ATENCIÓN
Make sure that you do not spill any water on the
base.
4. Release the button to open the lid.
5. Place the jug on the base, and insert the plug in the
wall socket. Push down the on/off switch. The on/off
pilot light will illuminate.
6. The jug kettle is now switched on, and the water
will now begin to heat. The jug kettle switches off
automatically a few seconds after the water has
come to the boil. The on/off pilot light will now
extinguish.
7. Remove the jug from the base by the handle, and
pour the water out.
ATTENTION
Be carefully you do not contact the hot water. It can
cause serious burning wounds
8. When you wish to heat the water without it
coming to the boil you can switch off the jug kettle at
any time you require.
9. Remove the plug from the wall socket when you
have finished using the jug kettle.
Overheating safeguard
The jug kettle is fitted with an overheating safeguard.
This will switch off the jug kettle if it is operated
without (sufficient) water. Allow the jug kettle to
cool down for at least 10 minutes before using it
again.
Cleaning and maintenance
• Remove the plug from the wall socket, and allow
the appliance to cool.
• Clean the jug with a damp cloth. Never immerse
the appliance in water. Never put the appliance
in a dishwasher. Make sure that the electrical
connections do not become damp.
• If the interior of the jug has become severely
discoloured, then the best way to clean it is with a
damp cloth and a little washing soda. After cleaning,
rinse the jug very thoroughly.
ATTENTION
• Never use corrosive or scouring cleaning agents
or sharp objects (such as knives or hard brushes) to
clean the appliance.
• Before cleaning, make sure that the appliance is
not connected to the power supply and that it has
cooled down.
Descaling
This appliance is equipped with an integral heating
element, and consequently limescale will not be
formed. Consequently you do not need to descaled
the appliance.
However, if you nevertheless do wish to descale the
appliance:
1. Remove the plug from the wall socket, and allow
the appliance to cool.