Remote Control - AVer DL30 Guía Rápida

Remote Control

The remote control requires two "AAA" size batteries. Make sure batteries are installed properly
before use.
(9) Reset
(10) ▲,▼,◄, & ►
(11) Enter
(12) Zoom In/Out
(13) EV +/-
(14) Upper Body
(15) Full Body
(16) Zone
(17) Camera Select
Name
(1) Power
(2) Remote Control LED
(3) Menu
(4) Switch
(5) Auto Tracking On
(6) Auto Tracking Off
(7) Number buttons
(8) Preset
Press "Reset" + "Number button (0~9)" simultaneously to cancel
pre-configured preset position. Remote control LED and camera button
LED will not light when pressing Reset button alone.
Pan and tilt the camera. Pan/Tilt speed by remote control is fixed. You
may change pan/tilt speed by using web browser. For setting details of
web browser, please refer to user manual.
After opening the OSD menu, confirm the selection or make a selection
in OSD menu.
Zoom in/out. Zoom in/out speed by remote control is fixed. You may
change zoom in/out speed by using web browser. For setting details of
web browser, please refer to user manual.
EV level adjustment.
Presenter's size on screen is upper body.
Presenter's size on screen is full body.
Zone mode.
CAM1 to CAM4 buttons. Select a camera to operate. Once a camera is
selected, the CAM button LED will be on when pressing other buttons.
English-4
Function
Turn the unit on/standby/privacy:
 Press once to turn on privacy
mode. Press again to turn off
privacy mode.
 Long press for 3 seconds to turn on
standby mode. Short press again to
turn off standby mode.
It will be on when pressing other
buttons.
Open and exit the OSD menu.
[Note] DL30 does not support OSD
menu.
Switch from presenter to another
presenter.
Turn on auto tracking.
Turn off auto tracking.
Use for setting the preset position 0~9.
Press "Preset" + "Number button (0~9)"
simultaneously to set the preset position.
Remote control LED and camera button
LED will not light when pressing Preset
button alone.