Indoor VHF/UHF antenna
Product information
1-This antenna amplifies TV signals with special microwave tube for clea-
rer receiving effect.
2-This antenna is suitable for use to receive digital TV signals, as it can di-
rectly receive TV signals transmitted by digital TV station and then amplify
and input into the TV set for viewing.
3-For outdoor use, make sure it will not easily get affected with damp or
get wetted by rain to ensure its normal performance and lifespan
4-There are 2 directions to install this antenna, that is, vertical upstanding
or horizontal side standing, and bind on the cylinder respectively for recei-
ving digital TV signals and normal TV signals.
5-To use, please plug the power adaptor in a proper AC power socket, and
insert the DC connecter in the DC jack on this antenna. Then insert the 2
ends of the TV cable respectively into the TV output jack on this antenna
and the TV input jack on the TV set, and you can adjust the receiving effect
by adjusting the antenna direction.
6-If you want to integrate this antenna with TV signal receive, the power
adaptor may not be necessary as long as the TV signal receiver has DC 6V
output at the signal input terminal and the DC output connector has posi-
tive on the inner pin. To achieve optimum receiving effect, it's suggested
that you install this antenna close to a window and away from interferen-
ce and properly adjust the lenght of the antenna
Main unit and accessories
Antenna
TV Cable
User Manual
Power Adaptor