How To Restore Factory Defaults - Linksys Velop WHW0303 Guía De Usuario

How to restore factory defaults

You should never need to factory reset your Velop----- -a very disruptive process. A factory reset
restores your Velop system to the state it was when you took it out of its box, requiring you to go
through the setup process again. All settings you have customized in setup and since -- - things such as
Wi-Fi name, passwords, security type -- - will be erased. All wireless devices will disconnect from your
Wi-Fi.
To reset Velop:
• With your node connected to power and turned on, press and hold the Reset button on the
bottom. The light on top of the node will turn red and fade in pulses. Do not release the button
until the light goes out and then turns bright red.
Note—If you have more than one node in your Velop system, you might need to reset them all to
factory default settings. First reset the main node—the node connected to your modem or modem
router—and only reset others if that doesn't fix your issues.
33