HiWatch DS-H1 G Serie Guía Rápida página 2

This manual is applicable for the following products:
DS-H1XXG/H1XXQ/H2XXU/N1XX/N6XX-XXP series DVR/NVR.
Safety Instruction:
You must carefully read this manual before use and installation of the product and keep this manual
properly.
Warnings:
Proper configuration of all passwords and other security settings is the responsibility of the
●
installer and/or end-user.
In the use of the product, you must be in strict compliance with the electrical safety regulations of
●
the nation and region. Please refer to technical specifications for detailed information.
Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power Source
●
with 100 to 240 VAC or 12 VDC according to the IEC60950-1 standard. Please refer to technical
specifications for detailed information.
Do not connect several devices to one power adapter as adapter overload may cause
●
over-heating or a fire hazard.
Please make sure that the plug is firmly connected to the power socket.
●
If smoke, odor or noise rise from the device, turn off the power at once and unplug the power
●
cable, and then please contact the service center.
Cautions
Ensure unit is installed in a well-ventilated, dust-free environment.
●
Unit is designed for indoor use only.
●
Keep all liquids away from the device.
●
Ensure environmental conditions meet factory specifications.
●
Ensure unit is properly secured to a rack or shelf. Major shocks or jolts to the unit as a result of
●
dropping it may cause damage to the sensitive electronics within the unit.
Use the device in conjunction with an UPS if possible.
●
Power down the unit before connecting and disconnecting accessories and peripherals.
●
A factory recommended HDD should be used for this device.
●
Improper use or replacement of the battery may result in hazard of explosion. Replace with the
●
same or equivalent type only. Dispose of used batteries according to the instructions provided by
the battery manufacturer.
1
EN-Quick Guide