HoMedics envira Scape WF-SBWL Manual De Instrucciones E Información De Garantía página 3

Package Contents
Part Description
A Base
B Pump
C Fountain Top
D Power Adaptor
E River Rocks
F Tube
G Notch
Figure 1
C. Fountain top
B. Pump
F. Tube
G. Notch
A. Base
Switch
4
Quantity
1
1
1
1
Varies
1
N/A
E. River rocks
D. Power adaptor
Assembly Instructions:
1. Unpack the product from package carefully. Keep packaging material for
safe storage (Fig. 1).
2. Familiarize yourself with the pump (Fig. 2). The pump speed is controlled
by the switch located at the front of the pump. The speed is indicated by a
plus(+) and minus(-) sign. To increase the speed, move the switch slowly
in the direction of the plus sign. You will hear a click as the switch moves
to each speed level. At its highest speed level, the switch will cease to
move any further. To decrease the pump speed, move the switch toward
the minus sign. Similarly, at its lowest speed, the switch will cease to
move any further.
Note: It is recommended the pump be set at its highest speed during
assembly and later adjusted to a lower setting if desired. Be sure to
unplug the pump before adjusting the speed setting.
3. Insert the tube (located on the bottom of fountain top) onto the pump.
4. Fill base with tap water to 1" from top. We recommend using distilled
water to prevent mineral build up.
5. Set the fountain top onto the base by notch so it sits level.
6. Attach the A/C adaptor jack to the base power cord. DO NOT plug into
outlet at this time.
7. Set the fountain on a level, waterproof surface.
8. Plug the cord into 120V household
outlet. The fountain is controlled by
the switch located on the power
cord. If pump doesn't operate, rotate
in-line switch once to turn "on" and
once more to turn "off". Monthly
maintenance will add to your pump's
life.
Note: Ensure that the electrical
cord loops below the electrical
outlet to form a 'Drip Loop'. This will
prevent water from running down the
cord into the electrical outlet.
9. Arrange the river rocks provided
on each fountain top "Bowl" and
platform. (If splashing occurs,
rearrange rocks until there is no more
splashing).
5
Fig 8
Drip loop