Terraillon THERMO FAST Manual De Instrucciones página 17

3 IN 1 AURICULAR THERMOMETER
TAKING THE TEMPERATURE OF AN OBJECT
• Remove the probe cap.
• Press the mode button to select 'take temperature of an object'.
• Always place the probe 1 to 5 cm from the object.
• Press the 'take temperature' button and hold it down for 2 seconds.
• Then remove the thermometer from the object.
• The temperature reading will be displayed.
CAUTION:
Make sure don't use this mode to measure body temperature.
CAUTION:
With object measurement, the current surface temperature
of the object is displayed. It can be different from its internal
temperature, especially if the surface is exposed to direct
sunlight or a draught.
MEMORY
• There are a total of 20 memory data for recording forehead
temperature measurements.
• The current measurement is always stored in the last storage
space. When all storage spaces have been occupied, the oldest
measurement is always deleted from the memory.
To display the last memorised result, press the memory recall
button «MEM». The last temperature reading will appear along with
the memory number.
To display the previous memorised results, press the memory recall
button «MEM» again and the memory numbers will be displayed.
Then press the "Mode" button to return to temperature-taking
mode.
Compare against your last reading.
The curve lets you see quickly if your temperature is higher or lower
than your last reading.
EN
higher
lower
17 17