Setting The Clock; Setting The Oven Timer - Bifinett KH 800 Instrucciones Para El Manejo Y La Seguridad

START
Press this button to start the cooking or defrost program. The cooking display and microwave internal light come on and the
ventilation fan starts up.
OPERATING INSTRUCTIONS
Acoustic signal sounds during setting
Each time a button is pressed this is confirmed by an acoustic signal.

SETTING THE CLOCK

1. Press the CLOCK button.
2. Press the CANCEL button.
3. Use the numerical buttons to set the current time. You must enter at least 3 numbers; one for the hour setting and two for the
minutes.
4. Press the CLOCK button again.
Note:
• This is a 12 hour clock. When the oven is closed the display should show 1:01. To set the current time repeat the steps described
above. Press the CLOCK button to display the current time during the cooking process.

SETTING THE OVEN TIMER

1. Press the TIME button.
2. Enter the time for which the microwave should run by pressing the numerical buttons. The time is entered in minutes and seconds
from left to right. You have the option of entering one digit (e.g. 5 for 5 seconds) or up to four digits
(e.g. 2405 for 24 minutes 5 seconds).
3. Press the POWER button.
4. Press the numerical button 0.
5. Press START.
Note:
• To delete the time during the time setting process, first press TIME then CANCEL.
SETTING THE COOKING TIME AND THE POWER
A. One stage cooking
1. Press the TIME button.
2. Use the numerical buttons to set the cooking time. The cooking time can be set to any period from one second to 99 minutes
and 99 seconds. If you select a cooking time that is longer than one minute, you must set the minutes and the seconds.
Example: To set 20 minutes, enter the following numbers: 2,0,0,0.
3. If you wish to use a power setting other than 100%, you can make the necessary change using the numerical buttons after you
have pressed the POWER button. You can select between settings 1-9.
4. To start the cooking process, press the START button.
USE THESE BUTTONS TO SET THE DESIRED POWER SETTING
Button Power output
9 90%
8 80%
7 70%
6 60%
5 50%
4 40%
3 30%
2 20%
1 10%
17