Introduction And Packaging Contents; Assembly; Installation Of The; Nd Bike - Sigma BC 1909 HR sTs Manual De Instrucciones

1 INTRODUCTION AND PACKAGING CONTENTS

1 PACKAGING CONTENTS
Bike computer
BC 1909 HR
STS chest belt
including
elastic belt
STS speed
transmitter
STS cadence
transmitter

2 ASSEmBly

The illustrations for these installation texts can be found on the enclosed folding sheet!
INSTAllING THE BIKE BRACKET
k The bracket can either be installed with cable ties
(permanent attachment) or optionally using the O-rings.
k Handelbars or stem.
k Remove the yellow foil.
4 www.sigmasport.com
2 ASSEmBly
INSTAllING THE TRANSmITTERS –
SPEED AND CADENCE
k Spoke magnet
k Both transmitters can either be installed with cable ties
(permanent attachment) or optionally using the O-rings.
k cadence magnet
k In order to achieve the necessary 12 mm or less install the transmittter
and the magnet closer to the wheel hub.
k handlebar bracket
This does not affect the wheel size setting.
k battery
compartment key
PUTTING ON THE CHEST BElT
k fastening material
k Rub water or cardio-gel on the electrodes.

2.1 INSTAllATION OF THE 2

Switching between BIKE 1 and BIKE 2 is automatic.
A second speed transmitter must be used.
(Accessory set "BIKE 2" Ref. No.: 00417, "BIKE 2 incl. cadence" Ref. No.: 00415)
Green light will turn red when bike 2 is activated.

3 START-UP

For reasons of energy consumption, the BC 1909 HR is supplied
without a battery.
Please insert the battery by opening the battery compartment
1 2 3 4
cover with the tool provided. Once you have inserted the battery,
close the battery compartment with the aid of the tool.
The display automatically jumps to setting mode.
Skip to language setting mode.
5 6
12 13
21
ND BIKE
BC 1909 HR
7 8
9
14 15 16
17 18 19
22 23 24
10 11
1909
5