Publicidad
INFRARED REMOTE CONTROL
EZCast Operation
Note: When using the IR remote control, you should aim at the projector rather
than screen.
POWER ON/OFF
1. Pull the power button to the left and hold it for about four seconds until the
green indicator on the projector bottom is lit up, then the projector starts to
work.
2. Turn the power button to the left again and hold it for about two seconds to
shut down the projector.
3. Turn the power button to the right to lock the button, then the projector can be
used as a power bank.
On/Off
Directions
Return
Mute
No Function
HDMI Operation
OK
Menu
Home
Vol +/-
2
Publicidad
