Vigilant AMK-RN Manual De Instrucciones

AMK-RN Audio Mounting Kit Installation Sheet
EN ES FR PT
EN: Installation Sheet
Description
The AMK-RN Audio Mounting Kit lets you install up to three
ACHS Audio Channel Selector cards in a VM-1 control panel
without a VM-PMI Paging Microphone Interface. ACHS Audio
Channel Selector Cards are ordered separately.
The kit includes an audio mounting bracket and interface card.
Installation
WARNING: Electrocution hazard. To avoid personal injury or
death from electrocution, remove all sources of power and
allow stored energy to discharge before installing or removing
equipment.
Caution: Circuit boards are sensitive to electrostatic discharge
(ESD). To avoid damage, follow ESD handling procedures.
To install the AMK-RN kit:
1. Attach the audio mounting bracket to the cabinet backbox
using the screws and K-nuts provided. See Figure 1.
2. Install the AMK-RN interface card on the audio mounting
bracket using the hardware provided.
© 2011 UTC Fire & Security. All rights reserved.
3. Connect the ribbon cable to J1 on the AMK-RN card and
J5 on the PS10-4B power supply card that is mounted on
the backbox behind the electronics chassis. See Figure 2.
4. Insert a channel selector card into J2 as described on the
ACHS Audio Channel Selector Installation Sheet
(P/N 3101791).
Specifications
Voltage
Operating environment
Temperature
Relative humidity
Regulatory information
Manufacturer Edwards, A Division of UTC Fire & Security
Americas Corporation, Inc.
8985 Town Center Parkway, Bradenton, FL
34202, USA
Year of The first two digits of the DATE MFG number
manufacture (located on the product identification label) are
the year of manufacture.
UL: Indoor dry
Environmental
class
Contact information
For contact information, see www.utcfireandsecurity.com.
1 / 8
24 VDC
32 to 120°F (0 to 49°C)
0 to 93% noncondensing
P/N 3101792-ML • REV 1.0 • ISS 24FEB11