Front Panel - Work Pro W MMX 65 Manual De Uso

FEATURES
MMX 65 is a mixer specially designed for professional installations. With full versatility. The 1 HU 19"
rack format in perfect for discotheques, clubs, theatres, etc.
MMX 65 features:
- 6 Line, 1 Phono, 3 Microphone inputs.
- MIC 1 is equipped with talkover attenuator, sensitivity adjustment, EQ and gain control.
- Balanced Mic inputs on front and rear panels.
- Simple on/off switches on front panel.
- Dual zone assign for all inputs.
- Two zone outputs with gain, balance, EQ and stereo/mono adjustment.
- Both zones have unbalanced and balanced outputs with master gain reduction.
- Headphone output with volume control.

FRONT PANEL

4
6 5
1. INPUT GAIN. This knob controls the input gain level on each source.
2. ON/OFF. This push button allows to included the selected audio source into the mixing. The activation
state is marked with the LED lighting.
3. ZONE ASSSIGN. This switch determines which output zone is driven the selected audio sourced
(A for Zone A, B por Zone B and A+B for both zones).
NOTE: Controls 1,2 and 3 are present in input channels CH2 to CH7
4. MIC 1 GAIN. This knob controls the input gain for MIC 1 present in the front side.
5. MIC 1 EQ CONTROL. MIC 1 incorporates 3 tone equalizer (Bass, Mid, Treble) with central point, in order
to equlizer this audio source.
6. MIC 1 INPUT. This Combi connector allows to connect either XLR3 or Jack 1/4" microphones.
7. OUTPUT GAIN. This knob controls the output gain level on each zone, Zone A in this case. Zone B
has the same controls (7,8,9,10,11).
2 1 3
2
7 8 9
10
11
User Manual/Manual de Uso
EN EN
12
13
MMX 65