GPO KW938BT Manual Del Usuario página 8

Powering your Personal Bluetooth Cassette Player
The unit is powered with either two AA (UM-3) batteries or an AC/DC
adaptor. Please note: Both the batteries or AC/DC adaptor are not
supplied.
Using batteries (NOT SUPPLIED)
1. Open the Battery Compartment (13) on the back of the unit by
sliding open and gently pulling upwards the battery door.
2. Check the polarity (+/-) inside the battery compartment.
3. Insert two AA (UM-3) batteries according to the polarity.
4. Close the battery door.
For best performance and extended operating time, we recommend
using alkaline batteries.
Using an AC/DC adaptor (NOT SUPPLIED)
1. Insert the DC plug (at the end of the AC adaptor cord) into the DC
Jack (12) on the bottom of the unit.
2. Plug the AC adaptor into a 220/230V~ 50Hz AC power socket.
3. The unit will automatically disconnect from using battery power and
operate using the AC/DC adaptor.
Playing Cassette Tape
1. Insert the provided Earphones plug into the Phone Jack (11).
2. Put on the Earphones.
8