Security Measures; Before Use - Plastimea MEALISS sense Manual De Utilización

MEALISS SENSE
The wax warmer makes it possible to have a hair removal worthy of an institute,
the MEALISS SENSE melts the wax and keeps it at the ideal temperature.
The MEALISS SENSE reduces the waxing and melting time compared to a standard wax heater. The
power of the wax heater MEALISS SENSE is 150W and will allow you to prepare a hair removal in less
then 5 minutes. Thanks to this heater you can have a smooth and silky skin, the MEALISS SENSE promises
a successful hair removal as in an institute but at home in all privacy.

SECURITY MEASURES

• This device can be used by people (included children older then 8 years) with limited physical, sensory
or mental abilities, if they are under surveillance and have been instructed to use the device in a safe
manner and if they understand the risks involved.
• Children are not allowed to play with this device. Cleaning and maintenance by the user should not be
performed by unattended children.
• Do not place the device where it may fall or where it can be pulled into a bathtub or sink.
• If the wax heater falls into the water, disconnect it immediately, do not touch the water.
• Do not immerse the device and cables in water. This may damage the unit or cause irreversible damage.
• Make sure the unit or cable is not faulty to avoid injury. If this is the case, please contact the customer
support at support@plastimea.com
• Place the device on a flat surface to avoid splashing.
• Make sure the heat level is not too high before using the device.
• The device is limited for domestic use only and not for external use.
• Electrical appliances must not be used for other purposes.

BEFORE USE

1. Remove the plastic film from the wax heater.
2. Plug in the power cable.
3. Place the bucket in the wax heater.
BUTTON OF USE
Power button
Press the button once to turn on the device (it will automatically emit 1 short beep) Press again to turn
off the machine and it will automatically beep for 3 seconds.
Temperature setting - Temperature button
Press the button and the temperature will decrease by 1°C. You can also press and hold the button to
set the desired temperature.
Heating button: time adjustment
Press the button once, the numeric display number starting with H is for the setting time. The time setting
is between 1 and 99 minutes.