Fizz Creations 1783 Instrucciones De Uso página 2

MAKING YOUR OWN
RADIO
This product includes everything you need to
make your own Radio!
Follow the instructions and you'll have made
your own Radio in no time! You will need to
use the double-sided tape & connecting pegs
to hold together the card nets and the tech
within. Closely follow the step by step guide
and use the reference key to ensure it is
completed successfully.
Attaching Components
Double Connecting
Sided Tape Pegs x 12
(1)
Electrical Components
Battery Pack (3)
Using the Radio
To operate the radio you have 2 dials, the volume ON/OFF dial (5)
and the reception dial (7). Turn the volume dial clockwise to turn
the radio on and adjust to your desired volume. The position and
location of the radio will affect the signal so please use various
places around your home. We recommend somewhere close to
a window with nothing blocking the antenna. Slowly turning the
dial will allow you to tune into different stations. Turning the dial
slowly will ensure you have the best chance of capturing your
favourite stations.
(2)
Top Tip!
Before you start it helps to fold along
the crease lines to further define the
shape – this makes it much easier
further down the line!
If one layer of double sided tape
comes unstuck, apply another strip to
the other side of the card so you are
sticking tape to tape. This will ensure it
is held together.
Speaker (4)
Volume & on/off
(5)
Reception Dial
(7)
2
GB
You will need:
1 x 9V Battery
(not included)
Antenna
(6)