2 Getting Started
2.1 Inserting the Memory Card
Insert the memory card with the gold contacts facing the big screen of the Dash Cam. Push the
memory card until it clicks into place. (Use class 6 or above the micro SD cards for this Dash
Cam; It is recommended to format the micro SD cards before the initial use.)
To remove the memory card:
Push the edge of the memory card inward until you hear/feel it click, then allow it to push out
until you can remove it from the slot.
Note:
1. Do not remove or insert the memory card when the device is powered on. This may damage
the memory card.
2.
It is recommended to use a 16 or 32 GB, Class 6 speed or above micro SD card.
3.
It is recommended to format the micro SD cards before the initial use.
8