Wrinkle Care - Midea MLE45N1BWW Manual De Usuario

5
Digital display
This digital will display the time of cycle you are setting or remaining
time of cycle operating.
6
Cycle status display
The relative indicator graphic or text will be lit when the dryer is in its
drying program. When the whole program is finished, the "Done"
indicator graphic will flash to remind you to unload your laundry.
7
START/PAUSE
Press to start or pause the program. You can't change any setting
except add a garment.
8
ECO DRY
Press to select the Eco Dry cycle. The Eco Dry cycle is a power
saving mode that reduces power while providing efficient drying
performance.
9

WRINKLE CARE

Press once to add the Wrinkle Care step into the operating program.
Press again to cancel selection.
Wrinkle Care provides approximately 90 minutes of intermittent
tumbling in unheated air at the end of the cycle to reduce wrinkling.
The load is already dry, and can be removed at any time during the
Wrinkle Care cycle.
10
DAMP DRY SIGNAL
This function is useful when you want to take some garments out for
ironing. The unit will beep 6 times when the moisture in the clothes is
good for ironing. At this time, you can take those garments out and
continue drying the other by pressing the "START/PAUSE" button
once.
NOTE: The unit will not stop operating if you don't take those
garments out for ironing.
11
SIGNAL
Press once to stop the buzzer sound.
Press again to activate the sound.
Your selection will be kept until next pressing.
12
DRYNESS LEVEL
Press the button to select the dryness level. Different dryness level
will result in different drying time. For clothes to be ironed manually,
a lower dryness level should be selected.
35