Viewing the Menus
1. With the power on, press the MENU button.
The main menu appears on the screen. The menu' s left side has five icons:
Picture, �ound, Channel, �etup, Input.
2. Use the ▲ or ▼ buttons to select one of the five icons.
Then press the ENTER button to access the icon's sub-menu.
. Press the EXIT button to exit.
The on-screen menus disappear from the screen after about one minute.
Memorizing the Channels
Your TV can memorize and store all of the available channels for both "off-air" (Air) and "Cable" channels. After the available
channels are memorized, use the CH
channels by entering the channels digits. There are three steps for memorizing channels: selecting a broadcast source,
memorizing the channels (automatic) and adding or deleting channels (Channel List).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to
the TV (i.e. an Air or a Cable system).
1. Press the MENU button to display the menu.
Press the ▲ or ▼ buttons to select "Channel", then press the
ENTER button.
2. Press the ENTER button select "Antenna".
Press the ▲ or ▼ buttons to select "Air" or "Cable", then press the ENTER button.
Press the EXIT button to exit.
All manuals and user guides at all-guides.com
or CH
buttons to scan through the channels. This eliminates the need to change
English - 16
TV
Input
Source List
: TV
Edit Name
Move
Enter
Exit
TV
Channel
Antenna
: Air
►
Auto Program
►
Clear Scrambled Channel
►
Channel List
►
Name
►
Fine Tune
►
Signal Strength
►
LNA
: On
►
Move
Enter
Return
TV
Channel
Antenna
:
Air
►
Air
Cable
Auto Program
Clear Scrambled Channel
Channel List
Name
Fine Tune
Signal Strength
LNA
: On
Move
Enter
Return
►
►