INSTRUCTIONS: SETUP
CAUTION: Any attempt to start the generator before it has been properly serviced
ADD ENGINE OIL: Refer to the diagram below.
1. Place generator on level surface.
2. Clean area around Oil Hole Dipstick/Plug &
Unscrew Oil Hole Dipstick/Plug.
3. Fill with appropriate type and amount. Refer
to Chart for recommended oil type based on
Environmental temperature.
NOTE: Refer to "Product Specifications" section
for universal recommended oil type and oil
amount.
4. Replace Oil Hole Dipstick/Plug and tighten securely.
THIS UNIT EQUIPPED WITH OIL DRAIN EXTENSION FOR EASY OIL
PRE-OPERATING
may result in engine failure and void warranty.
CHANGE AND MAINTENANCE
17
17