Midwest Ultima Pro 724UP Instrucciones De Montaje página 2

4. Make sure the bottoms of the two side panels rest inside
the bottom panel and that one edge of the top panel is
"inside" one side panel and "outside" the other side panel
(as illustrated).
5. Reach in the home and pull the door panel that is resting
on top toward you until it fits into the clips on the ends of
the side panels.
6. To secure the door panel to the top panel, gently pull
outward on the end panel while pushing down on the top
panel. Then fit the hooks over the end wire on the top. On
the 36", 42" and 48" crate, be sure the "u wire" stop on
the end of the top panel rests over the top wire of the door
panel.
7. Repeat Steps 5 and 6 with the end panel.
8. To remove the plastic pan, unhook the pan stop and slide the
plastic pan out of the crate through the space in the bottom
of the crate. To install the plastic pan, insert the pan and
rehook the pan stop to the bottom wire of the crate's front
panel.
9. To install the divider panel, first decide the appropriate
length of the crate to fit your dog. Make sure your dog will
have enough room to turn around and lie down comfortably.
Place the divider panel inside the crate with hooks facing
away from the front door panel and the dog's living area.
Secure the hooks of the panel to the sides of the crate, then
secure the safety latch in the middle of the panel and attach
the safety latch on the top to the top panel of the crate.
10. To disassemble, reverse this process.
Top Panel
Bottom Panel
Side
Panels
"U wire" on 36", 42"
and 48" crates
Safety Latches
2