auna Microstar Sing Manual De Instrucciones página 56

EN
Problem
No song lyrics
appear on the TV
screen
No image on TV
screen
Cannot sing through
the mic
Noise or sound
distorted on FM
broadcast
56
Possible Cause
Video cable is not
connected properly to the
TV.
Source selector on TV is not
set to VIDEO or A/V IN.
TV does not have video line
input.
TV input is not properly set.
Improper mic volume
setting.
Mic is off.
Mic is not properly plugged
in.
Station not tuned properly.
FM wire antenna is not fully
extended.
Solution
Connect the video cable to the VIDEO
OUT of the unit and to the TV's Video
In jack.
Use your TV Remote to select VIDEO
or A/V input.
Connect from VIDEO OUT of the unit
to a RF modulator and then to the TV
cable input.
Set TV input to correct A/V input that
is connected to the unit.
Adjust MIC and MASTER VOLUME
CONTROLS to appropriate levels.
Turn on mic with the ON/OFF switch
located on the microphone.
Insert the mic plug fully into either
MIC 1 or MIC 2 JACK of the unit
properly.
Fine tune the FM broadcast station.
Fully extend the FM wire
antenna.