Publicidad
Idiomas disponibles
Idiomas disponibles
1. Formation Bass Carton Contents
Formation Bass
Mains power cable set appropriate for your territory
Document pack
2. Installing Your Formation Bass
Location
Your Formation Bass requires a mains power supply
to operate so must be located within reach of a
mains socket. If your Formation Bass speaker is to
use a wired connection to your home network it will
need to be located within reach of an appropriate
network (Ethernet) cable.
Your Formation Bass speaker should be placed
on the floor in reasonably close proximity to the
Formation speaker it is partnered with. In the case of
a Formation Wedge or Formation Bar, a subwoofer
location directly beneath the speaker, or at least
adjacent to a common wall, is likely to produce the
best results.
In the case of a Formation Bass partnered with a
pair of Formation Duo speakers, the best results
are likely to be obtained if the Formation Bass is
placed between the Formation Duo speakers or in
the vicinity of one of them. Placing a Formation Bass
to the side, but still to the front of the listeners, is an
acceptable compromise if domestic considerations
dictate. The Formation Bass should not be located
behind the listening position. Diagram 1 illustrates
subwoofer positioning.
Note: Take care when handling your Formation
Bass not to damage the driver diaphragms
located on each end of its enclosure.
Diagram 1
Positioning
3
Publicidad
