Reconnecting To The Commute; Switching The Commute On And Off - Blueant Wireless COMMUTE Manual Del Usuario

will be prompted to upload the contacts manually.

Reconnecting to the Commute

To save battery, the Commute goes into "sleep mode" when
you are not using it.
If you take your phone out of range of the Commute for more
than 2 minutes, the handsfree trigger switches off and "sleep
mode" is activated.
When you come back, you must tap the symbol to reconnect
your phone and reactivate the trigger.
Alternatively, use the power switch to turn the Commute off
when you get out of the car and then turn it back on again
when you come back. The Commute will then automatically
reconnect to your phone.

Switching the Commute On and Off

To switch the Commute on or off, use the hardware power
switch located on the side of the device.
BlueAnt
> Slide the switch to the ON position to use the Commute in
handsfree trigger mode.
24