Logitech Squeezebox Touch Guia De Inicio Rapido página 11

* Squeezebox Touch normally relies on a DHCP server to provide an IP address
during setup If you prefer to use a static IP address, you can do it one of two ways:
•
Make sure your DHCP server is off, and input a static IP address when Squeezebox
Touch displays the appropriate screen
•
Set up and connect your Squeezebox as normal using DHCP After setup is complete,
go to the Settings screen and change the IP address by entering it manually
For more information on how to set a static IP address, go to:
www.mysqueezebox.com/support.
Music is not playing
1. If music is not playing, do the following:
2. Check the cables to your stereo or powered speakers to make sure they are connected
properly
3.
Check the input selector on your stereo to make sure it matches the inputs you used
4.
Check the volume on your stereo
5.
Add exceptions to your firewall software If you are listening to music from your
computer (using Squeezebox software), make sure there are no firewall warnings on
your screen and make sure your firewall has the proper exceptions Required exceptions
include: port 3483 UDP, port 3483 TCP, and port 9000 TCP
6.
As a test, try playing a different song
7.
If Squeezebox Touch says "Stopped," check your internet connection
I can't find my music collection in My Music
If you want to play the music collection that is stored on your computer but your
computer name does not appear in My Music, do the following:
1.
Make sure that you've installed Squeezebox software from
2.
Make sure Squeezebox software is running
• Windows
don't see "Squeezebox software Running," right-click on the icon and select Start
Squeezebox software
• Macintosh
software If the button displays Start Server, click it If the button is labeled Stop
Server, the application is already running
3.
If you are using a third-party firewall such as
please see our Knowledge Base at
articles on your specific firewall If your firewall is not covered by our Knowledge Base, add
exceptions for three ports as follows: port 3483 UDP, port 3483 TCP, and port 9000 TCP
For information on how to make this change in your firewall software, search the internet
for "exceptions, ports, <your firewall application name>," or contact technical support for
your firewall software
4. If your network uses multiple routers or Voice over IP (VOIP) or you're on a corporate
network that has a complex or segmented network configuration, ensure that your
computer and Squeezebox Touch are on the same network segment This allows
Squeezebox Touch to automatically connect to Squeezebox software on your computer
- Hover your mouse pointer over the software icon in your task bar If you
- Click on System Preferences, and then click on Squeezebox
Trend Micro, Norton, McAfee or OneCare ,
www.mysqueezebox.com/support
Quick start guide
www.mysqueezebox.com.
and search for
English 11