Important Notice - xtpower SP36 Manual De Instrucciones

Manual
This product is a Solar Charger that can be used to power mobile devices
with an output voltage of 5V and max. 2000mA from the USB output.
By using the DC output 18V with 1.65A can be provided to charge all our
high energy powerbanks with DC input.
For the best use of the Solar Charger and for your safety, please read
these instructions carefully before using the power bank.
Safety
- The product is not suitable for children as it contains fragile and
small parts that can be swallowed easily.
- Please do not drop and do not immerse in water as the unit will
be damaged.
- Do not expose to high temperatures or flammable gases.
- Please do not remove the housing.
- Please don't directly connect any contacts as this can lead to short
circuits.
Warranty and Liability:
- If there is a problem with the device, please contact your dealer.
- The manufacturer is not liable for injury or damage caused by
improper use.
- Modification of the product, misuse or unauthorized repair will
void the warranty.
- XTPower reserves the right to make changes to the product or the
instructions and manuals without prior notice.
Specifications:
1. Power: USB 5V 2000mA (max.) 10W
DC 18V 1650mA (max.) plug 5 x 2.1mm
31x20x6,5cm folded
2. Dimensions:
85,5x61,5cm unfolded
3. Weight: ca. 1,72kg
Accessories:
- Solar Charger with connecting cable
- 1 Manual
www.xtpower.de
Charge your mobile device:
- Take the USB plug of the supplied USB cable and connect it to the
USB port of the Solar Charger.
- Choose the appropriate connector for your device, connect it to
the USB cable and then plug it into your device.
- You can also use the original USB cable of your device.
- Your device will be charged when the charge LED of the Solar
Charge is on.
- The charging current very much depends on the exposure to
sunlight and can vary a lot. With low sunlight the charging stops
and will restart automatically depending on the sunlight.
- Please don't expose your mobile device to direct sunlight.
- With the 18V DC output all devices with according input can be
charged.

Important Notice:

Some Apple products like iPad require constant charging currents. With
changing solar light conditions the charging current will fluctuate which
may lead to some error message. To restart charging you need to
disconnect and connect again. We recommend in such case to use a
Powerbank as buffer.
Disposal
- Solar charger should not be disposed of with household waste.
- Recycling and disposal of electronic waste make an important
contribution to protect our environment.
CE Declaration of Conformity:
- This product bears the required CE marking according to Directive
2004/108/EC. The product meets the essential requirements of
the European directives and regulations.
141008
SP36