If the BUCKET FULL light does not extin-
guish, check that the float is correctly snap-
ped in place as indicated by the diagram.
CONTINUOUS DRAIN OPERATION
For continuous drainage operation, you will
need a garden hose and a drain nearby to
discharge the water
Important!
fig. 1
fig. 3
1. Unscrew the drain cap on the back
side of the unit. (fig.1)
2. Insert the female threaded end of the
hose onto the drain connector of the
unit (fig. 2).
3. Screw the garden hose onto the threa-
ded portion of the connector. (fig.3)
4. Make sure all the connection is secure
and there are no leaks.
5. Direct the hose toward the drain, mak-
ing sure that there are no kinks that will
stop the water flowing.
6. Place the end of the hose into the
drain. (fig.4)
7. Select the desired humidity setting and
fan speed on the unit for continuous
draining to start.
fig. 2
fig. 4
1. Check the seal between the hose and
the drain connector. If there is a small
leak then replace the hose gasket and
re-tighten the hose.
electrolux 7