Perel Tools ECM1 Guia De Inicio Rapido página 2

Range Specifications
Function
DC current
AC current (50/60Hz)
Non-contact voltage
4. Description
1. Jaws
2. Flashlight button
3. Rotary function switch
4. Data-hold and backlight button
5. LCD display
6. Trigger
7. DCA ZERO key
8. Non-contact AC voltage detection LEDs
9. Probe tip
5. Safety
Important information with reference to safety, consult the manual!
Double insulation
This meter has been designed with attention to safety, but the user must also take care to respect the safety
prescriptions described below.
1. Do not exceed the maximum values for current or voltage measurements.
2. Use extreme caution when working with voltages in excess of 25V AC rms. These voltages are considered a
shock hazard.
3. Never operate the device if the back panel or the cover of the battery or fuse compartment is not securely in
place.
4. Input limits: 200A (AC current), ±200A (DC current)
6. Operation
a) AC Current Measurements
1) Set the function switch to the ACA range.
2) Press the trigger and enclose a single conductor with the jaws,
which must be fully closed (see figure).
3) Read the ACA value on the LCD.
ECM1
Range
2A
22A
2A
200A
100Vac to 600Vac 50/60Hz
2
Resolution
200mA
200mA
1mA
100mA
Accuracy
± (2.8% + 10 digits)
± (3.0% + 8 digits)
± (3.0% + 10 digits)
± (3.0% + 8 digits)
PEREL